AIO FC BETAFPV Matrix 1S Brushless FC (AIO P1 HD VTX)

Product detailed description

AIO FC BetaFPV Matrix 1S Brushless FC (AIO P1 HD VTX)

The BetaFPV Matrix 1S AIO P1 HD FC is the lightest digital 1S flight controller, weighing just 4.60g. This fully integrated board combines an STM32G473 flight controller, a 12A continuous ESC, a Serial ELRS 2.4GHz receiver, and the P1 Air Unit HD VTX in a single compact unit, making digital whoop builds and maintenance easier than ever. The P1 Air Unit delivers a 1080p@60fps live feed with approximately 60ms latency over the ArtLynk protocol. It is an affordable, lightweight, plug-and-play entry into digital HD FPV.

Features:
— Lightest digital 1S AIO flight controller at 4.60g (5.99g with the Air HD Camera)
— Built-in P1 Air Unit HD VTX adds a digital HD member to the ArtLynk system
— All-in-one design combines STM32G473 FC, 12A ESC, Serial ELRS 2.4GHz RX, and VTX on one board
— STM32G473 MCU at 168MHz for responsive flight performance
— 12A continuous (18A peak) Bluejay ESC to meet the surge demands of 1S digital whoops
— 1080p@60fps live view with approximately 60ms glass-to-glass latency
— Serial ELRS receiver using the CRSF protocol, with Wi-Fi firmware flashing support
— 16MB Blackbox memory for flight data logging
— Standard 25.5x25.5mm mounting pattern with gold-plated JST1.25 motor connectors
— Connect the VTX antenna before powering on to prevent VTX burnout

Specifications:

FC:
MCU: STM32G473CEU6
Gyro: 3.2kHz
Blackbox Memory: 16MB
Sensor: Voltage & Current
BEC: 5V, Max 3A
UART: UART2, UART3 (RX), UART4 (HD VTX)
ESC: 1S, 12A Continuous
RX: Serial ELRS 2.4GHz (V3.5.3)
VTX: Onboard P1 Air Unit
USB Port: SH1.0-4Pin
Motor Connector: JST1.25 (Gold-Plated)
Battery Connector: BT2.0
Mounting Hole Size: 25.5x25.5mm
Board Thickness: 1.0mm
Dimensions: 30.5mm x 30.5mm
Weight (antenna & camera excluded): 4.60g

ESC:
Power Input: 1S
Current: 12A Continuous, 18A Peak
ESC Firmware: A_X_5_96KHz_V0.19.hex (BB51 Bluejay)
Digital Signal Protocol: DShot300, DShot600

RX:
RX: Serial ExpressLRS 2.4GHz
Antenna: Copper Wire, 31mm
Firmware Target: BETAFPV 2.4G AIO V2 RX
Telemetry Output Power: <12dBm
WiFi Firmware Flashing: Supported

VTX:
VTX: P1 Air Unit
Frequency: 5.1–5.9GHz
Power: 200mW
Video Transmission Latency: ~60ms
Live View Quality: 1080p@60fps

Compatible Air HD Camera:
CMOS: 1/2.9"
Resolution: 200 DPI
FOV: 153°
Aspect Ratio: 16:9
S/N Ratio: 41.5dB
Port: DF36-15
Coaxial Cable Length: 50mm
Dimensions: 11.9mm x 11.8mm x 14.2mm
Weight (cable included): 1.34g

Package Includes:
1x Matrix 1S Brushless Flight Controller (AIO P1 HD VTX)
1x Type-C Adapter
1x SH1.0-4Pin Adapter Cable
1x 5.8G Antenna
4x M1.2x4 Self-Tapping Screws
4x M1.4x5 Self-Tapping Screws
4x H1.2mm Shock Absorbing Balls