FPV Camera Walksnail Avatar Mini 1S Kit

Product detailed description

Avatar Mini 1S Kit

The Walksnail Avatar Mini 1S Kit includes an Avatar NANO Camera, with a 2.1mm lens and 170° FOV, the mini 1S VTX with 32G built-in Storage, an LHCP antenna. The Avatar HD system uses H.265 code to provide 1080p FPV image quality with ultra-low latency of 22ms. The Avatar mini 1S VTX weighs only 6.8g and fits perfectly with the 75X quad.

Specification:
 
Camera
Model: Avatar nano
Image Sensor: 1/2.7”1nch
Resolution: 1080P/60fps,720P/120fps,720P/60fps
Ratio: 16/9  4/3
Lens: 2.1mm
FOV: 170°
Aperture: F2.0
Shutter Rolling: Shutter
Min.Illumination: 0.001Lux
Weight: 3.5g
Dimensions: 14x14x17mm

VTX 
Model: Avatar mini 1s module
Communication Frequency: 5.725-5.850GHz
Transmitter Power (EIRP): FCC:<25.5dBm; CE:<14dBm;
SRRC:<20dBm; MIC:<25dBm
I/O Interface: JST1.0x6(Power in) JST0.8x4(USB)
Mounting Holes: 25.5x25.5mm
Dimensions: 30x30x6.5mm
Storage: 32G
Recording: 1080p/720p
Weight: 6.8g
Operating Temperature: -20 - +40°C
Channels: 8
Wide Power Input: 3.1V-13V
Supported FC System: Betaflight; Inav; Fettec; Kiss; ArduPliot
OSD: Canvas mode
Bitrate: 25mbps 50mbps
Latency: Average latency 22ms
Antenna: IPEX

VTX Antenna 
Model: Polar antenna
Polarization: LHCP
Bandwidth: 5.6GHz-5.9GHz
Average Gain: 2dBi
Radiation Efficiency: ≥98%
VSWR: ≤1.4
Connector: U.FL
Line Length: 90mm
Dimension: H105mm*R11.2mm
Weight: 1.5g

Package Includes: 
1 x Avatar Mini 1S KIT 
1 x 4 Pin USB Cable
1 x 6 Pin Power Cable
2 x M2x3/4mm Screws
4 x M2x16mm Screws
4 x M2 Screw nut
5 x 2.1x3.4x1mm Gasket