AIO DeepSpace Talos F405 20A ELRS2.4G RX

Product detailed description

AIO DeepSpace Talos F405 20A AIO integrated ELRS2.4G RX

The DeepSpace Talos F405 AIO 20A is an all-in-one flight controller and ESC board for digital FPV drones. It combines an STM32F405 flight controller, an ICM42688P gyro, a barometer, 16MB of blackbox memory, a 20A per-channel ESC with pre-installed Bluejay firmware, and an integrated ELRS 2.4GHz receiver with 100mW power. The built-in 100mW receiver gives a longer data transmission distance and simplifies wiring, which makes the build faster to assemble. Dual BEC outputs supply 5V for the receiver, GPS and buzzer, and a dedicated, isolated 9V output for an HD VTX, so the video system stays free of interference. It connects directly to the DJI O4 Wide, O4 Pro and O3 and other digital VTX modules with no soldering. It also takes a plug-in ELRS or TBS Nano receiver if you prefer an external one. It runs on 2–4S and mounts on the standard 25.5 x 25.5mm pattern.

Features:
— Integrated ELRS 2.4GHz receiver with 100mW power for longer range and simpler wiring
— 20A per-channel ESC with pre-installed Bluejay 48kHz firmware, DShot600 / DShot300
— Dual BEC outputs: 5V for the receiver, GPS and buzzer, and a dedicated 9V output for the HD VTX
— 9V VTX output isolated from the rest of the board to avoid interference
— Plug-and-play connection to the DJI O4 Wide, O4 Pro and O3 and other digital VTX modules, with no soldering
— Direct plug-in for external ELRS or TBS Nano receivers to reduce soldering work
— The onboard receiver can be disabled, so an external receiver can be used
— STM32F405 processor with an ICM42688P gyro, integrated barometer and 16MB blackbox
— Supports 2–4S LiPo and LiHV input
— Onboard pads for GPS, buzzer, LED strip and servo signal input
— Type-C configuration board supplied (SH1.0 4-pin to Type-C)
— BOOT button for Betaflight force-flash mode
— Compact 52.6 x 42mm board that weighs only 8.5g

Specifications:
Model: DS TALOS F405 AIO 20A
Flight Controller: STM32F405
Gyro: ICM42688P
Integrated Receiver: ELRS 2.4GHz, 100mW
Barometer: Integrated
Blackbox: 16MB
Analog OSD: Not supported
ESC Firmware: Pre-installed Bluejay 48kHz
ESC Protocol: DShot600 / DShot300
Continuous Current: 20A per channel
Input Voltage: 2–4S (LiPo / LiHV)
BEC: 5V 2A / 9V 2A
USB Interface: SH1.0 4-pin to Type-C
Mounting Hole Pitch: 25.5 x 25.5mm / M2
Dimensions: 52.6 x 42 x 7.6mm
Weight: 8.5g
FC Firmware Name: DEEPSPACE F405 RX
Receiver Firmware Name: DEEPSPACE 2.4GHz Nano 100mW RX

Package Includes:
1x AIO Board
1x Receiver Antenna
5x Shock-Absorbing Spacer
1x Capacitor
2x Power Cable
1x Receiver Cable
1x 6-Pin DJI O4 Pro Cable
1x SH1.0 4-Pin Cable
1x Type-C Configuration Board
1x XT30 Power Connector