FPV Drone GEPRC Mark5 HD O4 Pro DC PNP 6S

Product detailed description

FPV Drone GEPRC Mark5 HD O4 Pro DC PNP 6S

The GEPRC Mark5 HD O4 Pro DC 6S is a high-performance FPV drone engineered for cinematic and freestyle flying with DJI’s O4 Air Unit Pro. Featuring a 1/1.3" image sensor capable of 4K at 120fps and ultra-low latency 1080p transmission, this drone offers superior visual clarity. The robust frame includes an aluminum camera mount and silicone damping for stable footage. Powered by a TAKER F722 BT 50A stack and SPEEDX2 2107.5 1960KV motors, it delivers precise, smooth control. With Bluetooth tuning, quick-release arms, and a complete accessory pack, the Mark5 is ready for pro-level flight straight out of the box.

Features:

- Equipped with DJI O4 Air Unit Pro for clear, reliable video transmission.
- DC and wide-X frame options for different flying needs.
- Paired TAKER F722 BT 32Bit 50A stack with 2107.5 1960KV motors delivers ample power.
- Bluetooth tuning via mobile app makes adjustments effortless.
- Quick-release arms with two-screw swap for easy maintenance.
- Aluminum camera mount with silicone damping reduces vibration and resonance for the O4 Pro camera.
- Dedicated compartment for the capacitor and buzzer ensures a stable, jitter-free operation.
- Optimized frame damping reduces vibration, keeping electronics running smoothly.

Specifications:

Wheelbase: 230mm
VTX: DJI O4 Air Unit Pro
Camera: DJI O4 Air Unit Pro
Antenna: DJI O4 Air Unit Pro
Motor: SPEEDX2 2107.5 1960KV
Propeller: Gemfan 5136
Flight Controller: GEP-F722-BT-HD V3
MCU: STM32F722
IMU: ICM42688-P (SPI)
OSD: BetaFlight OSD with AT7456E
ESC: GEP-BL32 50A 96K 4-in-1
Power Connector: XT60EW-M
GPS: None
Receiver: PNP
Battery: LiPo 6S 1050–1550mAh (recommended)
Color: Emerald Green
Weight: 433.4g ± 5g
Flight Time: 6–8 minutes

Package includes:

1 x GEPRC MARK5 O4 Pro Drone
1 x Gemfan 5136 (2CW + 2CCW)
1 x 15×250mm Strap
2 x 20×250mm Straps
2 x Battery Anti-slip Pads
1 x 3D Printouts Pack
1 x Spare Screw Pack
1 x L-shaped Screwdriver (1.5mm, 2mm, 3mm)
1 x M8 Wrench

Spare Screws:

1 x M5 Flange Nylon Knurled Nut
2 x M2 Stainless Steel Press-fit Nuts
1 x M5×25 SS Button Head Hex Screw
4 x M3×10 Button Head Hex Screws
4 x M3×8 Button Head Hex Screws
2 x M3×8 Countersunk Hex Screws
2 x M3×5 Countersunk Hex Screws