FPV Drone CaddxFPV Protos RTF Kit

Product detailed description

FPV Drone CADDXFPV Protos RTF Kit

CaddxFPV Protos RTF Kit is a ready-to-fly FPV drone designed for immersive and high-quality flights. With a total weight of just 100g, it is easy to handle and safe for beginners, including children. Its digital HD video transmission and optimized brushless motor deliver responsive, stable performance and smooth video feed for precise flight control. The kit includes everything needed to start flying immediately, featuring a pre-assembled drone, FPV goggles, controller, batteries, and charger.

Features:

- Feather-light build: Ultra-light 100g drone for easy handling and portability
- Rock-solid signal: 6g HD digital VTX for stronger signal and smoother flight
- Optimized brushless motor: High RPM and efficient power delivery for instant takeoff and responsive control
- 2MP FPV HD camera: Stable and clear video feed for real-time flight monitoring
- 10-minute flight time: Enough for multiple short sessions without frequent charging
- 5.8GHz FPV transmission: Clear signal for uninterrupted FPV experience

Please note: The charger requires a 12–15V power adapter, which is not included in the kit

Specifications:

PROTOS

Flight Control: Caddx Protos Aio 1.0
Video Transmission: Ascent Lite
Motor Diagonal Distance: 78mm
Motor: 1102 14000KV
Propeller: HQprop U40mm×3GR-PC-1.5mm
Weight: 104.4g ±1.5g
Dimensions: 110×102.8×41mm
Flight Endurance: 8.5min ±0.5min
RC Receiver: ELRS 2.4GHz

FC (Flight Controller)
Main Control Chip: STM32-F405RGT6
Gyroscope: BMI270
Barometer: SPL06
Onboard Receiver: ESP8285
Receiver Protocol: ELRS 2.4GHz
ESC Protocol Compatibility: Bluejay / BLHeli-S Optional
ESC Maximum Current: 12A (Single Channel)

VTX (Video Transmitter)
VTX Model: Ascent Lite
Image Sensor: 1 / 2.8 inch Sensor
FOV: 147°
Ratio: 16:9
Resolution: 1080P 60FPS; 720P 60FPS
Built-in Storage: N/A
Max Transmission Range: Max 3km
Latency: Average delay 35ms
Power: 25~100mW

Ascent Goggles
Communication Frequency: 5.725–5.850 GHz
Transmit Power (EIRP): FCC: <30 dBm; CE: <14 dBm; SRRC: <20 dBm; MIC: <25 dBm
I/O Interface: 4Pin 3.5mm Plug, DC 5.5×2.1mm, Micro SD Card Slot
Transmission Resolution: 1080P 60FPS, 720P 60FPS
Code Rate: Max 50 Mbps
Minimum Latency: Average 32ms
Average Gain: 4.9 dBi
Polarization: LHCP
Transmission Distance: >4 km
Channel: 8
Screen Resolution: 1920×1080 / 60Hz
Screen Material: LCD
Screen Size: 4.5 Inch
Wide Voltage Input: 6V–25.2V (2S–6S)
SD Card Slot: Support up to 256GB

CADDXFPV Alink
Main Control Chip: AT32 F413RCT7
RF Module: ELRS 2.4GHz
RF Protocol: CRSF
Max RF Power: 100mW (20dB)
Number of Available Channels: 10 Channels (including 4 joystick channels)
Joystick Type: Full-Bearing Hall-Sensor Joystick Assembly
Function Switch: 1 x Latching Button / 2 x Momentary Buttons / 2 x 3-Position Toggle Switches / 1 x Scroll Wheel
Status Indicator Module: 4 x Status Indicator LEDs / Buzzer
Charging & Communication Interface: USB-Type C
Battery Specification: LiPo 1S 1000mAh
Max Charging Power: 5V / 1A / 3.50W
Operating Voltage Range: DC 3.50V–4.20V
Dimensions: 158mm × 108mm × 58mm
Weight: 180g ±5g

2S Charger
Name: 2S Charger
Display: LED x4
Channel: 3 (Sequential Charging)
Function Selection: Charging, Storage
Battery Type: Li-ion 2S 840mAh Battery
Input Voltage: 12–15V (PD Input, 5V Adapter Not Supported)
Output Voltage: 8.7V
Input Current: Max. 3A
Charging Current: Max. 3A
Balancing Current: Max. 0.21A
Charging Power: Max. 25W
Discharging Power: Total Power: 5W (Max 1.6W per Channel)
Interface: Type-C
Operating Temperature: -10~45℃
Storage Temperature: -20~60℃
Dimensions: 94 × 63 × 39.1mm
Weight: 65 ±0.5g

2S Battery
Name: 2S Battery
Battery Type: Li-ion (Lithium-ion Battery)
Battery Capacity: 840mAh
Battery Specification: 2S1P (2 Cells in Series, 1 in Parallel)
Discharge Rate (C-Rate): 15C
Maximum Power: 6.384Wh
Voltage Range: 6.80V–8.70V
Max Charging Voltage: 8.5V
Charging Method: 2S Charger
Charging Time: ≤20min
Protection Mechanism: When the voltage of a single cell drops below 2.8V, battery lock protection is triggered and charging is required to reactivate
Dimensions: 77.5 × 24 × 21mm
Weight: 41.9g ±0.5g

Package Includes:
1x FPV Drone CaddxFPV Protos RTF Kit