FC SpeedyBee F405 WING APP Fixed Wing

Product detailed description

SpeedyBee F405 WING APP Fixed Wing Flight Controller

F405 WING APP - easy installation, wireless configuration. Supports wireless configuration via Speedybee and QGroundcontrol apps, with no need for drivers or data cables. Support BLE, WI-FI, and classic Bluetooth. Plug in your digital VTX, receiver, camera, analog VTX, and GPS to complete your build-in on time. Also comes with 4x LED plugs so you can light up your plane with no headache. Dual firmware: INAV for handling FPV flight easily, Ardupilot for advanced capabilities. Stabilize flight, automatic take-off, Wing Racing, and Formation Flying.

Specifications:

Product Name: SpeedyBee F405 WING FC board
MCU: STM32F405,168MHz,1MB Flash
IMU (Gyro&Accelerometer): ICM-42688-P
Barometer: SPL006-001
OSD Chip: AT7456E
Blackbox: MicroSD Card Slot
UART: 6 sets (USART1, USART2, USART3, UART4, UART5, UART6 (Dedicated for Wireless board Telemetry connection))
I2C: 1x Used for magnetometer, digital airspeed sensor
ADC: 4x (VBAT, Current, RSSI, Analog AirSpeed)
PWM: 12x (11+1 LED pad)
ELRS/CRSF receiver: Supported, connected to UART1
SBUS: Built in inverter for SBUS input (UART2-RX)
LED: 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red) 1x RGB
RSSI: Supported, Named as RS.
Supported FC Firmware: INAV:SpeedyBeeF405WING(default) / ArduPilot: SpeedyBeeF405WING
Weight: 8.9g

Product Name: SpeedyBee F405 WING PDB board
Input voltage range: 7~36V (2~6S LiPo)
Battery Voltage Sensor: Connect to FC board VBAT, 1K:10K (Scale 1100 in iNav, BATT_VOLT_MULT 11.0 in ArduPilot)
Battery Current Sensor: 90A continuous, 215A peak Connect to FC board Current (Scale 195 in iNav, 50 A/V in ArduPilot)
TVS Protective diode: Yes
FC BEC output: Output 5.2V +/- 0.1V DC Continuous current 2.4 Amps, 3A Peak Designed for FC, Receiver, GPS module, AirSpeed module, Telemetry module, WS2812 LED_Strip
VTX BEC output: Output 9V +/- 0.1V DC Continuous current 1.8 Amps, 2.3A Peak Voltage adjustable, 9V Default, 12V or 5V via jumper Designed for Analog Video Transmitter, Digital Video Transmitter, Camera.
Servo BEC output: Output 4.9V +/- 0.1V DC Continuous current 4.5 Amps, 5.5A Peak Voltage adjustable, 4.9V Default, 6V or 7.2V via jumper Designed for Servos.
Weight: 11.4g

Product Name: SpeedyBee F405 WING Wireless board
Wireless Configuration (long press BOOT button for 6 seconds to switch modes): 
- BLE mode, connect to Speedybee APP;
- Wi-Fi mode, connect to QGroundControl APP, Speedybee APP, MissionPlanner, etc;
- Classic Bluetooth SPP mode, connect to QGroundControl APP, MissionPlanner.
LED strip controller (short press BOOT button to switch effects, long press 2 seconds to switch modes):
- 4x WS2812 LED strip connectors, adjustable colors and flashing modes;
- Max 5.2V 1.3A, supports around 70pcs 5050 WS2812 LED beads.
On-board battery level indicator: 4x RGB indicator LED for battery level display by a number of lights
Weight: 4.2g