iFlight BLITZ F745 Stack (E55S 4-IN-1 ESC)

Product detailed description

iFlight BLITZ F745 Stack (E55S 4-IN-1 ESC)

Features:

• Improved circuit design with better components and reduced electrical noise.
• DJI HD VTX Connector (Plug-and-Play / No soldering required).
• FC indicator LEDs for visual debugging.
• Supports Betaflight, INAV, and Ardupilot firmware.

Flight Controller (FC) Specifications:

• MCU: STM32F745
• Gyro: ICM42688
• Barometer: DPS310
• OSD Chip: AT7456E
• Flash Memory: 32MB (Blackbox flash)
• UARTS: 6
• Supports Smartaudio / IRC Tramp VTX protocols
• LED Controller: Yes
• Beeper Pad: Yes
• Mount Pattern: 30.5*30.5mm
• Dimensions: 36.5*35 mm
• Weight: 7.8g
• BEC:
  • Output 5V 2.5A continuous, 3A peak current (15 seconds)
  • Output 9V 2.5A continuous, 3A peak current (15 seconds)
• BF Firmware Target: IFLIGHT_BLITZ_F7_AIO
• Ardupilot Firmware: arduplane_with_bl

Wiring Suggestion:

• UART 1: for VTX HD / Analog
• UART 2: for Receiver
• UART 3/4/5: for GPS or other sensors requiring a serial port
• UART 6: for ESC Telemetry

ESC Specifications:

• Mounting Holes: 30.5*30.5mm/Φ4mm
• Weight: 15.3g
• Supports: 2-6S LiPo input
• MCU: G071
• Constant Current: 55 Amps
• Burst Current: 65 Amps
• Current Sensor: Yes
• BEC: No
• Current Rate: 200
• Supports: DShot DShot150/300/600/MultiShot/OneShot, etc.
• Target: IFLIGHT_BLITZ_G3 32.9

Packing List:

• 1 x BLITZ F745 V1.2 Flight Controller
• 1 x BLITZ E55 4-IN-1 2-6S ESC
• 1 x Silicon Grommets
• 1 x Wire Harness for F7 Flight Controller