FPV Drone HGLRC Petrel 85Whoop Entry-level RTF Set

Product detailed description

FPV Drone HGLRC Petrel 85Whoop Entry-level RTF Set

• Frame: Petrel 85Whoop frame
• Flight Control: SPECTER 10A AIO
• MCU: STM32F411
• GYRO: ICM42688
• Built-in Video Transmission:
  • 0-RCE-25-100-400mW (adjustable)
• Onboard ESC:
  • Continuous Current: 10A
  • Peak Current: 13A (10s)
  • ESC Protocol: Dshot600, Oneshot, Multishot
  • ESC Firmware: Z_H_30/(Bluejay)
• Flight Control Firmware:
  • HGLRCF411SX1280 V2
• Flight Control Input Voltage:
  • 3.7v-7.4v (Lipo)
• Installation Hole Position: 25.5X25.5mm, M2
• Motor: SPECTER 1202.5 11000kv
• Propeller: Gemfan 2015 two-blade
• ELRS Version Weight: 48+1g

Dongle Parameters:

• Built-in ELRS:
  • Maximum Supported Frequency: 250Hz
  • Receiving Distance: More than 200m
• Binding Method:
  • Quickly power on and off three times to enter binding mode
• Interface: USB TYPE-C + USB TYPE-A double plug
• Working Voltage: 5v
• ELRS Firmware Upgrade Method:
  • WIFI or USB plug
• ELRS Firmware Version: ELRS 3.0
• ELRS Firmware Name: HGLRC 2.4 GHz, HGLRC Hermes 2.4GHz RX
• External Receiver Support Protocol:
  • Only supports CRSF protocol
• Weight: 9.5g
• Size: 74mm x 21mm x 12.5mm

Remote Control Parameters:

• Built-in ELRS: ELRS 2.4GHz
• Built-in ELRS Refresh Rate: 250Hz
• Remote Control Sensor Type: Potentiometer sensor
• Antenna: Built-in IPEX1 generation copper tube antenna
• Working Voltage: 6-8.4v DC
• Remote Control Distance: Greater than 500m
• Output Interface:
  • TX Module NANO bin (CRSF protocol)
  • TYPE-C (only for charging and firmware flashing)
  • 3.5mm Analog Trainer Port
• Battery: 18650 flat head battery x2 (to be installed by user)
• Charging:
  • TYPE-C charging current 1.2A
  • Charging Time: About 3-4 hours
• Remote Control Channels: 8 channels
• Bluetooth: Bluetooth 4.2
• ELRS Firmware Upgrade Method:
  • WIFI or TYPE-C wire brush
• ELRS Firmware Version: ELRS 3.0
• ELRS Firmware Name: DIY devices 2.4 GHz DIY ESP32 + E28 2.4GHz TX
• Weight: 195g (excluding battery)
• Size: 160mm x 130mm x 50mm (excluding remote control)

5.8G FPV Video Goggles

• Model: 5.8G FPV video goggles
• Screen Material: 3.0-inch IPS high-brightness screen
• Display Resolution: 480 x 320
• Display Specifications: 16:9
• Field of View: 360-degree full viewing angle
• Backlight Brightness: 500cd/m²
• Video Delay: Less than 10 milliseconds
• Antenna Head: Inner hole antenna head with RP-SMA inner needle antenna
• Charging Port: Use TYPE-C to charge the built-in battery
• Headphone Port: 3.5mm AV jack supports video input and audio/video output
• Menu Language: Chinese and English
• Battery:
  • Power Adapter: Recommended to use DC5V/1A or DC5V/2A charging head
  • Battery Specifications: Built-in 3.7V/1200mAh polymer battery
• Power Consumption:
  • Operating Current: 350mA
  • Battery Charging Time: About 1 hour
  • Use Time: About 3 hours
• Size: 107mm x 150mm x 75mm
• Weight: 300g (excluding antenna)